Car Repair Kit Paintless Dent Removal Puller Kits Hail Damage Dent Glue Gun Tool

Description

Product Description
Car Repair Kit Paintless Dent Removal Puller Kits Hail Damage Dent Glue Gun Tool
The products of each set are shown in the
each set
Main Picture
About Golden Dent Lifter:
1.Aluminum body.
2.Stainless Steel Adjustment knob.
3.Stainless Steel Nuts/Bolts/Pivot pin/E-Retaining clips.
4.One screw o
n the top of the dent lifter is used to adjust the middle height of the dent lifter.
5.With sandblasting oxidation process, the smooth texture feels and outstanding looks, The product is very strong and durable.
6.On the bottom of the dent lifter is silicone, not ordinary rubber, which is very soft and not harmful for oil paint and can be torn down.
Note:
1.Use adjustable lifting-mode movable tripod puller and adjust it against the size of the dent.
2.During operation, you need to adjust your force gradually until the position where the dent is located is pulled to the flat and recovered entirely.
3.The Dent Lifter squeeze trigger will allow you to control and massage door dings and hail damage until the desired results are achieved.
4.New
material and new design, stronger material.
Black Plastic Dent
Puller
Specifications:
Material: Plastic Aluminum Soft Plastic Pads
Main Color: black
The new nanomaterial has excellent performance and lower price, is more durable than ordinary metals, with adjustable functions, and is suitable for dents of various sizes and depths.
Dent lifter have a soft silicone on the bottom which no harmful for oil paint; Baking-varnish-free dent repair, will no damage the paint, faster
Outstanding Design and Smooth
Texture Feel-Our dent lifter is our PATENTED products, on the bottom of which is silicone, not ordinary rubber, which is very soft and not harmful for oil paint and can be teared down. The product is very strong and durable.
Note:
If y
ou receive a Black Puller with the plastic rod, please replace it with a metal rod before use!!!
About 20 W Mini Glue Gun(US Plug):
Material: Plastic & Aluminum
Working power: 20 W
Working voltage: 100 to 2
4
0 V
Working temperature: 356 to 392
Nozzle diameter: 0.070-0.078 inch
Warm-up time: 3-5 minutes
Cable length: 55 inch
Size: 5.1 inch*4.3 inch*1 inch
Color: Blue
Warm Prompt
:
1. Keep clean of the glue sticks to avoid impurity block the nozzle, and do not pull out of the remanent glue sticks after each time using.
2. To avoid get an electric shock during use, do not use it in humid
environment and keep it away from children.
3. The remaining pressure inside the glue gun will push a little molten glue out of the gun even stop use, so to save your glue,
please control release the trigger or cut off the power in advance.
4. Cut off the power when stop using, and never try to disassemble the melt glue gun in any case.
About Different Sizes Glue Puller Tabs
Specifications
Material: strengthen plastic
Features:
1. Different tabs for different dent lifter or the Slide Hammer, Works with All Glue Pullers.
2. Unique small pits design, fit for Auto Body Dent Repair, this special face can bond the glue well, also clean it easily, the size can match perfectly with dent puller/lifter.
3. Durable design allows for perfect placement and superior adherent properties.
Step-By-Step Instructions for Repairing Car Paintless Dent
1. Prep tabs by soaking them in 91% rubbing alcohol and drying them before first use.
2. Insert a glue stick into the glue gun. Plug in the glue gun and allow it to heat up for 5 minutes.
3. Clean the area to be repaired with 91% isopropyl rubbing alcohol and a clean towel.
4. Select the correct sized dent pulling tab by comparing it to the size of the dent.
5. To save time when doing multiple repairs, glue and place all of the tabs at once on the vehicle, then do all of the repairs.
6. Apply hot glue to the dent pulling tab by pulling on the trigger of the glue gun until approximately a dime sized amount of glue is released. Use a pea sized drop of glue for smaller tabs and a dime size or slightly more for larger tabs.
7. Apply the dent pulling tab to the exact center of the dent.
8. Allow the glue to set for about 5 minutes. The glue should be hard to the touch at the time you begin repair.
9. Slide the dent lifter device directly over the dent pulling tab shaft until the female adapter in the center of the dent lifter slides over the shaft of the tab. Adjust the height knob accordingly.
9a
. The T-Hand Puller may be used for larger dents or to remove the last 10-20%of a dent.
10. Squeeze the dent lifter handle slowly several times until the desired result is achieved. As the damage gets smaller, reduce the size of the dent pulling tab until the dent becomes flush.
11. Spray 91% rubbing alcohol on the edge of the glue and p
e
el it away using the plastic scraper. .
12. If a high spot is created, gently tap down any high spots using the dent hammer and the plastic tap down tool provided, until the dent is flush.
About Logistics:
After receiving the payment, we will send your parcel from California within 2 days (usually within one day). You can usually receive the parcel in 4-7 days. The logistics is very fast, so don't worry.
About us:
We are from California, USA, and we are committed to building a good reputation to ensure that every customer is satisfied with us. Your satisfaction is our driving force. If you have any questions or comments about our products. please feel free to contact us.
We strive to ensure that every customer is 100% satisfied and solve any problems for you. ToIf you are not satisfied with this project. Please visit the store, there are more similar products waiting for you.
We will try our best to satisfy customers. If you are not satisfied for any reason, please do not leave negative/neutral feedback soon.